Frâne de siguranță NEXEN cu fixare pe flanșă

Frâne EMB pentru motoare (NEMA), inch

The Nexen flange mounted EMB spring-set motor brake is designed for 1/2—20 HP NEMA C-faced motors. This power-off brake is ideal for use in cycling, emergency stopping and holding applications. Low wear rate on the friction material combined with high thermal capabilities make this Motor Brake ideal for dynamic stopping applications. Spring-set, pneumatic released brakes run cooler and last longer than electrical spring-set brakes.

Articol	Codificare	Tipodimensiune carcasă	Moment static minim	Dimensiunea alezajului	Presiunea minimă de decuplare
964924	EMB-875-143/145TC	143TC, 145TC	398 inlbs	0.875 in.	80 psi
965300	EMB-1125, 182/184	182TC, 184TC	660 inlbs	1.125 in.	48 psi
965310	EMB-1375, 213/215	213TC, 215TC	876 inlbs	1.375 in.	64 psi
965320	EMB-1625, 254/256	254TC, 256TC	1104 inlbs	1.625 in.	80 psi
964914	EMB-625-NEMA 56C	56C	398 inlbs	0.625 in.	80 psi

Frâne EMB pentru motoare (IEC), metric

Articol	Codificare	Tipodimensiune carcasă	Moment static minim	Dimensiunea alezajului	Presiunea minimă de decuplare
964846	EMB-110-14, IEC-71 FRAME	71A, 71B	14 Nm	14 mm	3.4 bar
964910	EMB-130-19, IEC-80 FRAME	80	45 Nm	19 mm	5.5 bar
964911	EMB-130-24, IEC-90 FRAME	90L, 90S	45 Nm	24 mm	5.5 bar
965301	EMB-180-28, IEC-100/112	100L, 112M	100 Nm	28 mm	4.4 bar
965307	EMB-180-28, IEC-100/112, 6 SPRING	100L, 112M	60 Nm	28 mm	2.7 bar
965303	EMB-230-38, IEC-132S/M FRAME	132M, 132S	125 Nm	38 mm	5.5 bar
965305	EMB-230-38, IEC-132S/M FRAME, 60-PSI REL,SPCL	132M, 132S	94 Nm	38 mm	4.1 bar

Frâne FMBES pentru motoare

Spring-engaged for holding in power-off conditions. Self-adjusting for friction material wear. Totally eliminates the necessity to shut down for periodic adjustments. No special requirements or additional parts for vertical-mounted applications. Air-released, greater heat-sink capacity for cooler, more reliable performance. Ideal for high-cycle applications. Nickel-plated and sealed for water protection per NEMA standard 1.26.55 (IP54).

Articol	Codificare	Tipodimensiune carcasă	Moment static minim	Dimensiunea alezajului	Presiunea minimă de decuplare
827360	FMBES-1125CC*420 IN LBS	182TC, 184TC	420 inlbs	1.125 in.	30 psi
827380	FMBES-1375CC*900 IN LBS	213TC, 215TC	900 inlbs	1.375 in.	50 psi
827343	FMBES-875CC*100 IN LBS	143TC, 145TC	100 inlbs	0.875 in.	10 psi
827344	FMBES-875CC*200 IN LBS	143TC, 145TC	200 inlbs	0.875 in.	20 psi
827340	FMBES-875CC*300 IN LBS	143TC, 145TC	300 inlbs	0.875 in.	30 psi
827323	FMBES-625CC*100 IN LBS	56C	100 inlbs	0.625 in.	10 psi
827320	FMBES-625CC*200 IN LBS	56C	200 inlbs	0.625 in.	20 psi

Frâne SE pentru motoare

Spring-engaged brakes provide protection to equipment when fast, dependable stops are required for non-cyclic applications. Restrictor valve controls exhaust air during engagement, ensuring a smooth stop. 3 moving parts insure durability and dependability. Mounting flexibility–NEMA C-Flange mount or Shaft mount capability. Not intended for vertical mount. No dynamic thrust load on bearings when unit is engaged. No thrust load, or virtually no radial load, when unit is disengaged and motor is running.

Articol	Codificare	Tipodimensiune carcasă	Moment static minim	Dimensiunea alezajului	Presiunea minimă de decuplare
806000	SE-200-1*0.875 BORE	143TC, 145TC	225 inlbs	0.875 in.	50 psi
805900	SE-100-1*0.625 BORE	56C	100 inlbs	0.625 in.	40 psi
805941	SE-100-1*0.625 BORE, SPCL	56C	225 inlbs	0.625 in.	50 psi
805904	SE-100-1*0.500 BORE, NSB NA	NA	100 inlbs	0.500 in.	40 psi
805912	SE-100-1*0.875 BORE, SPCL	NA	100 inlbs	0.500 in.	40 psi
806001	SE-200-1*20MM BORE, NSB	NA	225 inlbs	20 mm	50 psi
808241	SE-500-1*1.125 BORE, SPCL	182TC, 182TC	1150 inlbs	1.125 in.	30 psi
808204	SE-500-1*1.000 BORE, NSB	182TC, 182TC	575 inlbs	1.000 in.	30 psi
808200	SE-500-1*1.125 BORE	182TC, 182TC	575 inlbs	1.125 in.	30 psi
808300	SE1000-1*1.375 BORE	213TC, 215TC	1150 inlbs	1.375 in.	40 psi
808343	SE1000-1*1.375 BORE, SPCL	213TC, 215TC	288 inlbs	1.375 in.	40 psi
808342	SE1000-1*1.375 BORE, SPCL	213TC, 215TC	575 inlbs	1.375 in.	40 psi
808212	SE-500-1*19 MM BORE, SPCL	NA	575 inlbs	19 mm	30 psi
808301	SE2000*1.375 BORE	213TC, 215TC	2000 inlbs	1.375 in.	40 psi

Frâne MB pentru motoare (NEMA)

These Spring Set Brakes provide high torque in a compact unit. Static Torque capacity up to 1800 In-lbs. Maximum Operating Speed up to 3600 rpm. Bore sizes up to 1.875 inches. Thermal Horsepower rating up to 0.450. Designed to mount directly to NEMA “C” faced double shafted electric motors. CANNOT BE VERTICALLY MOUNTED. Order Brake and Hub separately.